Guides, resources and standards

The guides, standards and resources in this section will help to ensure your development and infrastructure remain consistent.

Click on any of the below tabs to find out more.

(show below)

Standard drawings

(show below)

Access to our standard drawing and design library allows contractors and consultants design and execute works in accordance with our specifications. This ensures new developments and infrastructure, or modifications to existing infrastructure remain consistent.

Our standard drawings include:

Water

Typical Scour Valve
Typical Scour Valve with DN80 Camlock
Typical Air Valve Pit Lid
Typical Air Valve Pit
Marker Post

Sewerage

Typical Air Valve Pit
Typical Air Valve Pit with Offset Odour Scrubber
Typical Bollards
Typical Scour Valve with DN80 Camlock
Marker Posts

Reclaimed water

Temporary Service less than 80mm
Service less than 80mm
Service Flow Control Valve 80mm or greater - Detail
Service Flow Control Valve 80mm or Greater
Service 80mm or Greater
Typical Bollard Arrangement
Typical Scour Valve with D80 Camlock
Typical Aluminium Air Valve Pit Lid
Typical Air Valve Pit

Fencing

Weldmesh Fencing Sheet 1 of 2
Weldmesh Fencing Sheet 2 of 2
Chainlink Fencing
Chainlink Fencing – No Barbed Wire
Standard Cantilever Sliding Gate

Overall

Thrust Connector Detail

Electrical

Two Pump Small SCA Panel Typical
Two Pump Small SCA Concrete Plinth Typical
Two Pump Large SCA Panel Typical
Surface Mounted Meter Panel Typical
Generator Connection Panel Typical
External Area Floodlight Pole Typical

(show below)

Works-as-executed plans

(show below)

WAE plans must be prepared and submitted to show Shoalhaven Water the actual position of the constructed assets. The plan is recorded in our system and is used for future planning and maintenance purposes.

The documents are also used to provide information to customers about Council’s assets.